HEX
	HOST
        

	\ bit offsets
	\ Both these codes enable receiver as well
    | 5 CONSTANT _#m68_transmit_enable
    | 9 CONSTANT _#m68_transmit_disable


	| : _m68_transmit_enable ( device --)
		_#m68_transmit_enable SWAP _#m68_control + C!
	;

	| : _m68_transmit_disable ( device --)
		_#m68_transmit_disable SWAP _#m68_control + C!
	;


    

	\ intended for use with panic" and panic.
	\ These word may not use any of the OS structures.
	: _panic_emit ( char)
		BEGIN
			_#m68b_base _#m68_status + C@
			04 AND 
		UNTIL
		_#m68b_base _#m68_data + C!
	;		
	
	: panic ( addr n --)
		\ disable transmit interrupts
		2 _#m68b_base _#m68_int_enable + C!
		\ enable trasmitter
		_#m68b_base _m68_transmit_enable
		zero DO
			DUP C@ _panic_emit
			CHAR+
		LOOP
		DROP
		\ wait until last character sent
		BEGIN
			_#m68b_base _#m68_status + C@
			08 AND 
		UNTIL
		\ Force a interrupt
		\ The interrupt software can handle a false interrupt.
		\ If a transmit was in progress this is required to restart it.
		_#m68b_base _m68_transmit_disable
		3 _#m68b_base _#m68_int_enable + C!
		_#m68b_base _m68_transmit_enable
	;

	: $panic ( $ --)
		COUNT panic 
	;

	\ take a number and print it out as a hex string
	: .panic ( x --)
		\ disable transmit interruts
		2 _#m68b_base _#m68_int_enable + C!
		\ enable trasmitter
		_#m68b_base _m68_transmit_enable
		8 0 DO
			\ data mask(--
			DUP 1C RSHIFT 
			DUP 0A < IF
				\ ascii 0
				30 + 
			ELSE
				\ ascii A 
				41 0A - +
			THEN
			_panic_emit
			10 *
		LOOP
		DROP
				\ wait until last character sent
		BEGIN
			_#m68b_base _#m68_status + C@
			08 AND 
		UNTIL
		\ Force a interrupt
		\ The interrupt software can handle a false interrupt.
		\ If a transmit was in progress this is required to restart it.
		_#m68b_base _m68_transmit_disable
		3 _#m68b_base _#m68_int_enable + C!
		_#m68b_base _m68_transmit_enable

	;

	: panic_cr
		2 _#m68b_base _#m68_int_enable + C!
		\ enable trasmitter
		_#m68b_base _m68_transmit_enable

		#cr _panic_emit
		#lf _panic_emit
		
		\ wait until last character sent
		BEGIN
			_#m68b_base _#m68_status + C@
			08 AND 
		UNTIL
		\ Force a interrupt
		\ The interrupt software can handle a false interrupt.
		\ If a transmit was in progress this is required to restart it.
		_#m68b_base _m68_transmit_disable
		3 _#m68b_base _#m68_int_enable + C!
		_#m68b_base _m68_transmit_enable
	;


	: panic_emit ( --)
		2 _#m68b_base _#m68_int_enable + C!
		\ enable trasmitter
		_#m68b_base _m68_transmit_enable
		
		_panic_emit

		\ wait until last character sent
		BEGIN
			_#m68b_base _#m68_status + C@
			08 AND 
		UNTIL
		\ Force a interrupt
		\ The interrupt software can handle a false interrupt.
		\ If a transmit was in progress this is required to restart it.
		_#m68b_base _m68_transmit_disable
		3 _breg_UMR11 _#m68_int_enable + C!
		_#m68b_base _m68_transmit_enable
	;


	\ Run time code
	: _panic"_do ( --)
		R> 
		DUP
		COUNT +    \ addr addr1 (--
		ALIGNED    \ addr addr2 (--
		>R
		COUNT
		panic
	;

    : panic_dump ( addr n --)
    	SWAP -2 AND  DUP ROT + SWAP DO
    		panic_cr I .panic  BL panic_emit I $10 +  I     
    		DO  
    			I @  .panic  BL panic_emit four  
    		+LOOP
    	 		BL panic_emit
				BL panic_emit 
				I 10 + I DO
    			I C@ $7F AND DUP BL <  IF
    				DROP $2E 
    			THEN
    		 	DUP 07F = IF 
    		 		DROP $2E 
    		 	THEN  panic_emit
      		LOOP  
      	$10 +LOOP 
	;
	 

Determine if the address is within the SDRAM is enough, we just don't want to generate another address error.

 
	: code? ( addr --flag)
		_#start_dynamic _#end_dynamic WITHIN
	;	  
	 

$"

The panic type uses polled output to logical unit zero. It is to be used to print information on bad bad situations.

 
	\ This version is for use in interrupt code.
    forth : panic" ( flag--)   
		HOST
		COMPILE _panic"_do  ," 
    ;   TARGET
	 

 
	: panic_show ( add n --)
		OVER code? not IF
			2DROP
			panic_cr
			panic" Not in code space"
		ELSE
			SWAP $30 - SWAP $40 MIN panic_dump
		THEN
	;